.png)
English
中文
Products > EH series fixed beam longmen surface grinder
EH series fixed beam longmen surface grinder
| 主要參數(Specifications) | |||||
| 項 目 I T E M / 機 型 M O D E L | FSG1600EH | FSG1800EH | FSG2000EH | ||
| 工作臺寬度 | Table width | mm | 1250 | 1400 | 1600 |
| 工作臺長度 | Table length | mm | 2000、2500、3000 | 2500、3000 | 2500、3000 |
| 加工寬度 | Max,machinging width | mm | 1500 | 1800 | 2000 |
| 加工長度 | Max.machinging length | mm | 2000、2500、3000 | 2500、3000 | 2500、3000 |
| 最大磨削高度 | Max.machinging height | mm | 610 | ||
| 龍門間距 | Gantry width | mm | 1650 | 1850 | 2050 |
| 工作臺縱向有效行程(X軸) | Table longitudinal travel(X axis) | mm | 2000、2500、3000 | 2500、3000 | 2500、3000 |
| 臥磨頭橫向行程(Y軸) | Hgrinding head cross travel(Yaxis) | mm | 1575 | 1900 | 2100 |
| 工作臺縱向移動速度 | Table moving speed | m/min | 5~25 | ||
| 磨頭橫向(Y)進給速度 | Cross feed speed of grinding head(Y) | mm/min | 0~2000 | ||
| 磨頭橫向(Y)最小進給量 | Min feed rate of grinding head(Y) | mm | 0.005 | ||
| 磨頭橫向(Y)間歇進給量 | Intermittent feed of grindinghead(Y) | mm/t | 1~50 | ||
| 磨頭垂直(Z)進給速度 | Vertical feed speed of grinding head(Z) | mm/min | 0-2000 | ||
| 磨頭垂直(Z)最小進給量 | Min feed rate ofgrinding head(Z) | mm | 0.005 | ||
| 主軸轉速 | spindle speed | r/min | 1323 | ||
| 主軸電機功率 | main power | kw | 18.5 | ||
| 砂輪尺寸(外徑×厚×內孔) | wheel size(OD*W*ID) | mm | 500*75*203 | ||
Domestic business:+86-631-5551758 18663114739 13573702233
International Business:+86-631-5551758 13573741581 13465132383
After sales service: +86-631-5551758 13573741581 13465132383
Company procurement:+86-631-5771758
Company email: wemill@163.com
Company address: No. 56 Jinhua North Road, Lingang District, Weihai
Navigation
Request a Quote
Submit
Copyright: Weihai Fengrun Intelligent Equipment Co., Ltd. Address: No. 56 Jinhua North Road, Lingang District, Weihai Record No.: Lu ICPB 18053470-3